Marketplace

July 27, 2016
2
Yes
None
1
Name...
/marketplace/
Thumbnail
Rig BR-1
Call for pricing
Rig BR-1 Image

Specs:

 

Mast

(1)  2006 BHL 131’ high, 550,000 hook load, 5 section mast with accessories. (5) Sheave cluster & (1) fast line sheave grooved for 1 ¼” line. Racking board, ladder, tong counterweights, derrick climber, 4” standpipe and manifold.

 

Substructure

Box on box substructure 22’W X 19’ H X 49’ L with pony sub, rotary beams, V-door ramp, (3) stairs, safety rails, (2) 200 gal. air receiver tanks.

 

Draw works

(1) TFI-1000M single drum draw work, with Eaton 236 Disk brake auxiliary brake, powered by (2) C-15 diesel engines with Twin Disc F-11516 TC torque converters and all accessories, connected by TFI double engine in line oil bath compound.

 

Power Generation System

(1) DMT 670-C 600 Kw AC generator powered by Cat. 3412 diesel engine with complete accessories.

(1) LIMA 625 Kw AC generator powered by Cat 3412 diesel engine with complete accessories. (1) General electric switchgear panel.

(1) Federal Pacific 45 KVA transformer.

(1) Curtis RS30B rotary screw 30 hp. air compressor.

(1)  Fuel day tank, skid mounted

(1) Group of electrical distribution cables, with 10 electric  suitcases housed in 8 x 10 x 40 utility house.

 

Drilling Tools

(1) 3750’ new 1 1/4” drilling line

(1) Continental Emsco RA-36 250 Ton Block/hook combination with 5 sheaves.

(1) Set of two 108” elevator links.

(1) National N-69 300 Ton swivel.

(1) 6” o.d. lower Kelly cock

(1) 6” o.d. TIW valve

(1) VARCO Kelly drive bushing, with rollers and pin drive.

(1) National 27 ½” rotary table with split bushings.

(1) International Tools OWI 1500 pneumatic Kelley spinner.

(1) International Tools OWI 35C7 pneumatic drill pipe spinner.

(1) Set of two Webb Wilson type B rotary tongs with assorted heads.

(1) 3 ½” X 60’ Rotary hose

(2) 3 ½” X 20′ Vibrator hoses

(2) 8” X 10’ Suction hoses

(1) Group of gages and instrumentation units.

(1) Bear 500,000 lb. Double dial weight indicator.

(2) Drill collar safety clamps.

(1) Mud bucket

(1) Satellite automatic driller.

(1) Star 4-pin drilling recorder.

(1) Rat hole and mouse hole. (9 5/8” Mouse hole)

(1) Group of elevators and slips of various types.

 

Well Control

(1) CPC 5-station closing unit w/triplex pump, powered by TESCO 20 hp. electric motor, two airdriven hydrolic pumps, 145 gallon reservoir tank, 12 bottles, gauges, lights, mounted on 6’ X 12’ skid.

(1)  4-station remote closing unit.

(1) Regan 11” X 3000 psi. annular BOP

(1) 5000psi. manifold group, skidded.

(1) BOP spool, bolts, nuts, ring gaskets, piping, and other support units.

 

Mud Circulation System

(2)  FES MZ-9 1000 hp. triplex mud pumps w/forged steel fluid ends, quick change caps, 5000 psi pulsating dampener, Mission 5X6 charging pumps, with accessories and support units, each powered by Cat. 398 diesel engines with accessories. Skidded on three runner skids.

(1) 411 barrel suction tank, w/ 6’ covered porch, 2  X 7.5 hp. mud agitators, internal plumbing, flat bottom, top mounted walkways, safety rails, lights, skidded, mud trough, 2 each Baker 5” X 6” centrifugal mixing pumps powered by 2 50hp electric motors, mud mixing hopper, chemical mixing barrel, emergency shower and eye wash station.

(1) 411 barrel shaker tank, w/ 6’ covered porch, 2 X 7.5 hp. mud agitators, internal plumbing, flat bottom, top mounted walkways, safety rails, lights, skidded, mud

trough, duel Vortex Orbital 3000 single screen, linear motion shale shaker. Baker 5” X 6” centrifugal pump powered by 50hp. electric motor, with Vortex desander w/ 2 X 6” cones.  Baker 5” X 6” centrifugal pump powered by 50hp. electric motor, with Vortex desilter, w/ 6 X 2” cones.

 

Rig Fabrication

(1) 8’ X 20’ top mounted dog house w/ 6 lockers, storage bench, microwave, heater and lights.

(1) 8’ X 40’ lower dog house, with parts compartment, 12 lockers, shelves, work benches, heater, lights, skidded.

(1) 500 barrel rectangle shape water tank w/ two 1 ½” X 2” centrifugal water pumps powered by two 5 hp. electric motors.

(1) 8000 gallon cylindrical fuel tank, with 3 compartment oil lubester built in, skidded.

(6) sets of triangle pipe racks (12)

(1) 4’ X 35’ X 8’ equipment carryall

(1) 5’ X 42” X 48’ single section catwalk, with hinged steel v-door attached

(5) 8’ X 37’ X 4’ pipe boxes

 

Drill Collars

25 joints of 6 ¼” od,  31’ , 99 lb. per ft. drill collars, with collar lift subs.

 

 

Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at [email protected]

AC Drawworks
Call for pricing
AC Drawworks Image

S&V manufactures drawworks for 1000 HP, 1200 HP and 1600 HP AC ratings. All drawworks feature a heavy duty oilfield type skid and gear box that eliminates the need for clutches, sprockets and chains.

A smaller, lighter design provides a self contained footprint for easy transport. With a reduced size and fewer parts, our drawworks require less maintenance then a conventional DC or mechanical drawworks.

AC motor braking provides safe, reliable and cost effective operations.

S&V can provide advanced electronic drawworks control packages that support the latest generation of AC drives.

 

Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at [email protected]

1600HP DC Mud Pump
Call for pricing
1600HP DC Mud Pump Image

1600 HP Mud Pump mounted on master skid. Complete with two (2) rebuilt DC traction motors, kevlar belts and sheaves, 5M pulsation dampner, relief valve, pressure gauge, liner wash system and a supercharging centrifugal pump.

We can unitize to your specifications.

 

Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at [email protected]

Electric Drill Line Spooler
Call for Pricing
Electric Drill Line Spooler Image

Standard electric drill line spooler unit build is as follows:

Drive:
The motor transmits the torque through a chain and gear system connected to the shaft. The motor and shaft gear system is covered with a guard for protection. All welds are seal welded.

Controls:
Each unit is supplied with capability for forward and reverse directional control via a throttle valve for air and hydraulic while the electric is through a start/stop control box.

A sleeve on the main shaft can be unpinned with derrick pin for freewheeling capability when power is not provided.

Capacity:
Unit is designed to accommodate a maximum operating weight of 30,000 lbs of drill line. Unit is designed to accommodate a max reel size of 120” diameter x 58” width.

Structure:
The unit is a fabricated steel frame construction. It is built from an i-beam base with a square tubing a-frame design for support. The main shaft is 5” in diameter and is supported by blocks on each end with grease nipples installed for lubrication. Each block has an oil impregnated bronze material sleeve for shaft support.

Shaft blocks are re-movable with 1” derrick pin for reel change out. Lifting pair of padeyes are provided on both sides of the shaft support blocks for lifting during reel change out.

Two adjustable locking bolts pins are mounted on the main shaft locking plate. Adjustable clamp tapered sleeve on main shaft for the arbor on the customer supplied reel.

Logistics:
Each unit will be mounted on an approximately 7′ 10” wide x 12′ 7” long oilfield type land skid with loading hitches for tail-boarding.

The side of the skid can accommodate forklifts with two fork channels.

Coating:
Each unit to be blasted, primed and painted per a two coat paint specification. Typically 1 coat of primer and 1 coat of customer specified poly-urethane top coat.

We can also make a spooler custom to your specific application.

 

Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at [email protected]

Pneumatic Drill Line Spooler
Call for Pricing
Pneumatic Drill Line Spooler Image

Land or offshore air drill line spoolers. Standard unit build is as follows:

Drive:
The motor transmits the torque through a chain and gear system connected to the shaft. The motor and shaft gear system is covered with a guard for protection. All welds are seal welded.

Controls:
Each unit is supplied with capability for forward and reverse directional control via a throttle valve for air and hydraulic while the electric is through a start/stop control box.

A sleeve on the main shaft can be unpinned with derrick pin for freewheeling capability when power is not provided.

Capacity:
Unit is designed to accommodate a maximum operating weight of 30,000 lbs of drill line. Unit is designed to accommodate a max reel size of 120” diameter x 58” width.

Structure:
The unit is a fabricated steel frame construction. It is built from an i-beam base with a square tubing a-frame design for support. The main shaft is 5” in diameter and is supported by blocks on each end with grease nipples installed for lubrication. Each block has an oil impregnated bronze material sleeve for shaft support.

Shaft blocks are re-movable with 1” derrick pin for reel change out. Lifting pair of padeyes are provided on both sides of the shaft support blocks for lifting during reel change out.

Two adjustable locking bolts pins are mounted on the main shaft locking plate. Adjustable clamp tapered sleeve on main shaft for the arbor on the customer supplied reel.

Logistics:
Each unit will be mounted on an approximately 7′ 10” wide x 12′ 7” long oilfield type land skid with loading hitches for tail-boarding.

The side of the skid can accommodate forklifts with two fork channels.

Coating:
Each unit to be blasted, primed and painted per a two coat paint specification. Typically 1 coat of primer and 1 coat of customer specified poly-urethane top coat.

We can also make a spooler custom to your specific application.

 

Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at [email protected]

Hydraulic Drill Line Spooler
Call for Pricing
Hydraulic Drill Line Spooler Image

Standard hydraulic drill line spooler unit build is as follows:

Drive:
The motor transmits the torque through a chain and gear system connected to the shaft. The motor and shaft gear system is covered with a guard for protection. All welds are seal welded.

Controls:
Each unit is supplied with capability for forward and reverse directional control via a throttle valve for air and hydraulic while the electric is through a start/stop control box.

A sleeve on the main shaft can be unpinned with derrick pin for freewheeling capability when power is not provided.

Capacity:
Unit is designed to accommodate a maximum operating weight of 30,000 lbs of drill line. Unit is designed to accommodate a max reel size of 120” diameter x 58” width.

Structure:
The unit is a fabricated steel frame construction. It is built from an i-beam base with a square tubing a-frame design for support. The main shaft is 5” in diameter and is supported by blocks on each end with grease nipples installed for lubrication. Each block has an oil impregnated bronze material sleeve for shaft support.

Shaft blocks are re-movable with 1” derrick pin for reel change out. Lifting pair of padeyes are provided on both sides of the shaft support blocks for lifting during reel change out.

Two adjustable locking bolts pins are mounted on the main shaft locking plate. Adjustable clamp tapered sleeve on main shaft for the arbor on the customer supplied reel.

Logistics:
Each unit will be mounted on an approximately 7′ 10” wide x 12′ 7” long oilfield type land skid with loading hitches for tail-boarding.

The side of the skid can accommodate forklifts with two fork channels.

Coating:
Each unit to be blasted, primed and painted per a two coat paint specification. Typically 1 coat of primer and 1 coat of customer specified poly-urethane top coat.

We can also make a spooler custom to your specific application.

 

Please call 832-962-8196 or 832-831-5856 for pricing and availability or email at [email protected]

Rig BR-1 Image
Rig BR-1
Specs:   Mast (1)  2006 BHL 131’ high, 550,000 hook load, 5 section mast with accessories. (5) Sheave cluster & (1) fast line sheave grooved for 1 ¼” line... Read More
Call for pricing
AC Drawworks Image
AC Drawworks
S&V manufactures drawworks for 1000 HP, 1200 HP and 1600 HP AC ratings. All drawworks feature a heavy duty oilfield type skid and gear box that eliminates the need for clutches, sprockets and chains. A smaller, lighter design ... Read More
Call for pricing
1600HP DC Mud Pump Image
1600HP DC Mud Pump
1600 HP Mud Pump mounted on master skid. Complete with two (2) rebuilt DC traction motors, kevlar belts and sheaves, 5M pulsation dampner, relief valve, pressure gauge, liner wash system and a supercharging centrifugal pump. We ca... Read More
Call for pricing
Electric Drill Line Spooler Image
Electric Drill Line Spooler
Standard electric drill line spooler unit build is as follows: Drive: The motor transmits the torque through a chain and gear system connected to the shaft. The motor and shaft gear system is covered with a guard for protect... Read More
Call for Pricing
Pneumatic Drill Line Spooler Image
Pneumatic Drill Line Spooler
Land or offshore air drill line spoolers. Standard unit build is as follows: Drive: The motor transmits the torque through a chain and gear system connected to the shaft. The motor and shaft gear system is covered with a gua... Read More
Call for Pricing
Hydraulic Drill Line Spooler Image
Hydraulic Drill Line Spooler
Standard hydraulic drill line spooler unit build is as follows: Drive: The motor transmits the torque through a chain and gear system connected to the shaft. The motor and shaft gear system is covered with a guard for protec... Read More
Call for Pricing